Manufacturer: RADICI
Produced At: Europe / China
Product Category: Polyamide 66 (Nylon 66)
Product No: Radilon A HSK 372 M NER
Product Quantity: 25KG / BAG
Product Features: Fast Molding Cycle,Good Mold Release,Heat Stabilized,Lubricate
Radilon? A HSK 372 M NER
Additive |
|
Features |
|
Uses |
|
RoHS Compliance |
|
Appearance |
|
Processing Method |
|
Resin ID (ISO 1043) |
|
Physical | Dry | Conditioned | Unit | Test Method |
Density | 1.14 | -- | g/cm? | ISO 1183 |
Molding Shrinkage 3 | ISO 294-4 | |||
Across Flow | 1.1 | -- | % | |
Flow | 0.80 | -- | % | |
Water Absorption | ISO 62 | |||
Saturation, 73°F, 0.0787 in | 8.9 | -- | % | |
Equilibrium, 73°F, 0.0787 in, 50% RH | 2.1 | -- | % |
Mechanical | Dry | Conditioned | Unit | Test Method |
Tensile Modulus | 471000 | 189000 | psi | ISO 527-2/1A/1 |
Tensile Stress (Yield) | 12300 | 7980 | psi | ISO 527-2/1A/50 |
Tensile Strain (Yield) | 4.0 | 30 | % | ISO 527-2/1A/50 |
Nominal Tensile Strain at Break | 5.5 | > 50 | % | ISO 527-2/1A/50 |
Flexural Modulus 4 | 450000 | -- | psi | ISO 178 |
Flexural Stress 4 | 16000 | -- | psi | ISO 178 |
Impact | Dry | Conditioned | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | |||
-22°F | 1.9 | -- | ft·lb/in? | |
73°F | 2.4 | 5.7 | ft·lb/in? |
Thermal | Dry | Conditioned | Unit | Test Method |
Heat Deflection Temperature (264 psi, Unannealed) | 158 | -- | °F | ISO 75-2/Af |
Vicat Softening Temperature | 464 | -- | °F | ISO 306/B50 |
Melting Temperature 5 | 500 | -- | °F | ISO 11357-3 |
Electrical | Dry | Conditioned | Unit | Test Method |
Surface Resistivity 6 | 1.0E+12 | 1.0E+10 | ohms | IEC 60093 |
Volume Resistivity 6 | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
Comparative Tracking Index(Solution A) | 500 | -- | V | IEC 60112 |
Flammability | Dry | Conditioned | Unit | Test Method |
Flame Rating (0.031 in) | V-2 | -- | UL 94 | |
Glow Wire Flammability Index (0.08 in) | 1380 | -- | °F | IEC 60695-2-12 |
Flammability | 0 | -- | in/min | FMVSS 302 |
Injection | Dry | Unit | |
Drying Temperature - Desiccant Dryer | 176 | °F | |
Drying Time - Desiccant Dryer | 2.0 to 4.0 | hr | |
Dew Point - Desiccant Dryer | -4 | °F | |
Suggested Max Moisture | 0.15 | % | |
Processing (Melt) Temp | 518 to 554 | °F | |
Mold Temperature | 158 to 194 | °F | |
Injection Rate | Moderate |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields