Manufacturer: RTP Company
Produced At: Import / China
Product Category: Polyetheretherketone(PEEK)
Product No: RTP 2203 LF Z
Product Quantity: 25KG / BAG
Product Features: Low Flow
RTP 2203 LF Z
Filler / Reinforcement |
|
Features |
|
Agency Ratings |
|
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | 1.46 | ASTM D792 | |
Molding Shrinkage - Flow (0.125 in) | 3.0E-3 | in/in | ASTM D955 |
Water Absorption (24 hr, 73°F) | 0.12 | % | ASTM D570 |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 1.00E+6 | psi | ASTM D638 |
Tensile Strength | 18000 | psi | ASTM D638 |
Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
Flexural Modulus | 1.10E+6 | psi | ASTM D790 |
Flexural Strength | 28000 | psi | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (0.125 in) | 1.5 | ft·lb/in | ASTM D256 |
Unnotched Izod Impact (0.125 in) | 11 | ft·lb/in | ASTM D4812 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (264 psi, Unannealed) | 510 | °F | ASTM D648 |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
Flammability | Nominal Value | Unit | Test Method |
Flame Rating (0.06 in, RTP Tested) | V-0 | UL 94 |
Additional Information | |||
Molding Shrinkage, ASTM D955, 0.25in: 5 mil/in Tensile Elongation, ASTM D638: 2-3% |
Injection | Nominal Value | Unit | |
Rear Temperature | 675 to 800 | °F | |
Middle Temperature | 675 to 800 | °F | |
Front Temperature | 675 to 800 | °F | |
Mold Temperature | 300 to 400 | °F | |
Injection Pressure | 10000 to 15000 | psi |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields