Manufacturer: DSM
Produced At: Europe / China
Product Category: Polyethylene Terephthalate(PET)
Product No: Arnite AV2 360S
Product Quantity: 25KG / BAG
Product Features: Flame Retardant
Arnite? AV2 360 S
Contains release agent
Filler / Reinforcement |
|
Additive |
|
Features |
|
Processing Method |
|
Multi-Point Data |
|
Resin ID (ISO 1043) |
|
Physical | Nominal Value | Unit | Test Method |
Density | 1.73 | g/cm? | ISO 1183 |
Water Absorption | ISO 62 | ||
Saturation, 73°F | 0.40 | % | |
Equilibrium, 73°F, 50% RH | 0.12 | % |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 1.89E+6 | psi | ISO 527-2 |
Tensile Stress (Break) | 23200 | psi | ISO 527-2 |
Tensile Strain (Break) | 2.0 | % | ISO 527-2 |
Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | ISO 179/1eA | ||
-22°F | 3.8 | ft·lb/in? | |
73°F | 3.8 | ft·lb/in? | |
Charpy Unnotched Impact Strength | ISO 179/1eU | ||
-22°F | 17 | ft·lb/in? | |
73°F | 17 | ft·lb/in? |
Thermal | Nominal Value | Unit | Test Method |
Heat Deflection Temperature | |||
66 psi, Unannealed | 464 | °F | ISO 75-2/B |
264 psi, Unannealed | 428 | °F | ISO 75-2/A |
Melting Temperature 3 | 491 | °F | ISO 11357-3 |
CLTE | ISO 11359-2 | ||
Flow | 1.1E-5 | in/in/°F | |
Transverse | 3.6E-5 | in/in/°F | |
Effective Thermal Diffusivity | 8.67E-8 | m?/s |
Electrical | Nominal Value | Unit | Test Method |
Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
Electric Strength | 740 | V/mil | IEC 60243-1 |
Relative Permittivity | IEC 60250 | ||
100 Hz | 3.70 | ||
1 MHz | 3.40 | ||
Dissipation Factor | IEC 60250 | ||
100 Hz | 1.0E-3 | ||
1 MHz | 0.012 | ||
Comparative Tracking Index | 225 | V | IEC 60112 |
Flammability | Nominal Value | Unit | Test Method |
Flammability Classification | IEC 60695-11-10, -20 | ||
0.06 in | V-0 | ||
0.028 in | V-2 | ||
Oxygen Index | 36 | % | ISO 4589-2 |
Fill Analysis | Nominal Value | Unit | |
Melt Density | 1.35 | g/cm? | |
Melt Thermal Conductivity | 1.4 | Btu·in/hr/ft?/°F | |
Specific Heat Capacity of Melt | 0.399 | Btu/lb/°F |
Injection | Nominal Value | Unit | |
Drying Temperature | 212 to 248 | °F | |
Drying Time | 3.0 to 12 | hr | |
Rear Temperature | 518 to 536 | °F | |
Middle Temperature | 518 to 536 | °F | |
Front Temperature | 518 to 554 | °F | |
Nozzle Temperature | 518 to 554 | °F | |
Processing (Melt) Temp | 518 to 536 | °F | |
Mold Temperature | 266 to 284 | °F | |
Injection Rate | Moderate-Fast | ||
Back Pressure | 435 to 1450 | psi | |
Screw Compression Ratio | 2.5:1.0 |
Products are widely used in plastic modification, automotive, construction, electrical and electronic, industrial, daily necessities and other fields